MAINTAIN STOP

Found on the MAINTAIN MENU, this screen allows you to perform several functions on stop locations in the system.

 

How do I change the school(s) a stop services?

How do I see what route a stop is on?

 

Maintain Menu Screen

Maintain Stops Selection Menu

You have two options in this menu:

STOP - EDIT

Click [Stop][Edit] on the menu and the following screen pops up.

Maintain Stop Edit Screen

You can scroll down any of the following lists and select the stop you want displayed. Click Go To Stop (the toolbar button of the stop with the arrow) or double click on the stop (if located) and it will appear on the map. At the bottom of the screen, all students with their name, address, school name, & grade will appear for each stop.

ALL STOPS


Stops Toolbar

This button will display all stops (located and unlocated).

LOCATED STOPS


Stops Toolbar

This button will display all Located stops.

UN-LOCATED STOPS


Stops Toolbar

This button will display all Un-Located Stops.

 

The displayed list will sort by stop description (grouping them by street name first). To select a stop from the list, highlight the description in the list. If there are students assigned to this stop, they will be listed in the lower table.

NOTE: A stop has to be located in order to be put on a route.

GO THERE


Stops Toolbar

Found on the STOPS toolbar, this button displays the location of the selected stop on the map.

Select a stop from the list by clicking on it, then click Go There or double click the stop in the list. If the stop is located, the map will center on the location of the selected stop and place a stop symbol on the map. The stop will be highlighted with a green circle for a few moments in order to help you find it.

DISPLAY NEAR STOPS


Stops Toolbar

How Do I Locate an Unlocated Stop?

Found on the STOPS toolbar, this button will display bus stops located within the visible map area only, not the entire map.

The stop names will be listed alphabetically. Use this function when placing unlocated stops on the map. Knowing where all existing stops are located will help you to find other stop locations.

Maintain Stops - Display Near Stops Screen

LOCATE STOP MANUALLY


Stops Toolbar

Found on the STOPS toolbar, you can manually place stops on the map or move a stop to another location.

First, zoom into the map area where you want to place the stop. If you need help finding the street, use Map Screen Bottom Bar until you manually find the location for the stop that you want to manually locate.

Select the stop you want to place on the map and click Locate Stop Manually. Click the location on the map where you want the stop to be located. The stop will be removed from the un-located list and a stop symbol will appear on the map at the selected location.

NOTE: All stops that are not located will be displayed in red in the list of stops.

AUTO LOCATE ALL STOPS


Stops Toolbar

Using the STOPS toolbar, you can let BusBoss™ automatically locate stops on the map.

Click Auto Locate All Stops to start the function. This function will attempt to locate all unlocated stops. This process may take a long time depending on the number of stops and the speed of your computer. If you want to continue, click Yes. If you want to cancel, click No.

Auto Locate Message Screen

Any stop that could not be located will still be displayed in the unlocated list on the Edit Stops Screen.

EDIT STOP DESCRIPTION


Stops Toolbar

Found on the STOPS toolbar, the Edit Stop description button allows you to change the stop description.

Select a stop from the list of stops by clicking on it. Click Edit Stop Description to open the Bus Stop Information screen. From here, you can change the stop description. The description is limited to 50 characters.

Bus Stop Information Screen

Click Close to save your changes and close the window.

DELETE STOP


Stops Toolbar

Can I delete a stop?

Found on the STOPS toolbar, this toolbar button allows you to delete bus stops from the system.

Select a stop from the list by clicking on it. Click Delete Stop on the toolbar and the following screen displays. Click Yes to delete the stop. The stop will then be removed from the screen. Click No and the stop will not be deleted.

Delete Stop Confirmation Screen

NOTE: You can NOT delete a stop that is being used by a student, bus route, school location, depot location, or transfer location. You can Print a report of all the students and routes using this stop from the error message screen. After the stop is not in use, then you can delete it.

Delete Stop Error Message

SNAP TO STREET


Stops Toolbar

Found on the STOPS toolbar, Snap to Street is used to automatically relocate stops that BusBoss may have problems routing. 

NOTE: House stops often cannot be routed because they are either placed too far from a road, or in the middle of one. BusBoss then cannot determine which side of the road the bus must stop on.

Highlight a stop that you wish to relocate, and click Snap to Street. BusBoss will attempt to place the stop close enough to the road that it can be routed properly.

SHOW STUDENT


Stops Toolbar

Found on the STOPS toolbar, you can display what students are assigned to a specific stop.

Select a stop from the list by clicking on it. Next, select a student from the list of students assigned to that stop. Click the Show Student button and the student information screen opens displaying the information for the selected student.

SHOW ROUTES


Stops Toolbar

Found on the STOPS toolbar, this function will display a list of all the routes for the selected stop.

Select a stop from the list by clicking on it. Click the Show Routes button and the route(s) for the selected stop will be displayed on a screen.

Show Routes Screen

PRINT


Stops Toolbar

Found on the STOPS toolbar, this will print all information for the selected bus stop for Current or History Information.

Stop Info Report

Select a stop, and click on the print button. A report is generated and you have the options to export or print.

Bus Stop Information Report

HELP


Stops Toolbar

Click this button to search for help on using BusBoss™.

STOP - ASSIGN STUDENTS TO STOPS

Found on the STOPS selection menu, use this button to assign students to bus stops either manually or automatically. You can also automatically assign walkers within this screen.

Click [Stop][Assign Students to Stops] and the following screen pops up.

Assign Students to Stops Screen

Assign Students to Stops Toolbar

ALL - This button will display all Active Students

A - This button will display all Assigned Riders

U - This button will display all Un-Assigned Riders

You can scroll down any of the lists to select the student you want to assign.

The displayed list will sort by student name. To select a student from the list, highlight the description in the list. To select a student , click on the student name in the list. All of that student's current and history addresses with days assigned to them will display in the lower tables. Each current address should be assigned to a stop.

NOTE: Students that are walkers will not show up on the ASSIGNED or UNASSIGNED lists.

STUDENT SEARCH


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button allows you to search the list of students to quickly locate a student name.

Click the Student Search button and the following window pops up. Type in the name of the student you are trying to find. If the student is listed, the list will jump to that student and highlight the name in the list of students.

Student Search Screen

SHOW STUDENT


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, you can display a student's information screen.

Select a student from the list by clicking on the name in the list. Click the Show Student button and the student information screen opens displaying the information for the selected student. You can view and/or modify the student's information.

EDIT ADDRESS


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, use this button to modify the student's existing address description, not for changing a student from one address to another. Use Assign Address in the Student Information Screen to assign a student to another address.

Select a student from the list and select an address from the lower table by clicking on them. Click Edit Address and the following window pops up. To edit the address, type the information in the appropriate location.

The Clear button will clear all fields in the address, OK will accept the changes and close the window, and Cancel will not change anything and will close the window.

Edit Address Screen

GO TO HOUSE


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button will display the student's house on the map.

Select a student from the list and select an address from the lower table. Click Go To House and the map will center on the house location of the selected address and place a house symbol where the student lives. The house will flash a couple of times to help you locate it.

MANUALLY LOCATE HOUSE


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button allows you to manually locate a student's house on the map.

First, use the Find Street and/or Find Intersection functions on the streets toolbar to find the location for the house that has not been located.

If the student has more than one address assigned, select one address from the list. Click Manually Locate House and click on the map where you want the house to be located. The system will locate the house and a house symbol will display on the map at that location.

GO TO STOP


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button displays the location of the student's stop on the map.

If the student has more than one address assigned, select one address from the list. Each address should have a stop assigned (if the student is a rider). Click the Go To Stop button and if the stop is located, the map will center on the stop and the stop symbol will display on the map at that location.

MANUALLY ASSIGN STUDENT TO STOP


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button allows you to manually assign students to bus stops.

Click Un-Assigned Students to display the list of students that do not have bus stops. Select a student from the list and select an address from the lower table. Click Go To House to find the student's address location. The map will be centered around the house and a house symbol will be displayed on the map (if the address is located).

How do I find stops close to a student for routing?

If you do not have stops displayed, click on Show Closest Stops For School to display all stops that service the student's school and that are within the walk to stop distance designated for that school. If the stop you want is not displayed, click Show All Closest Stops to display ALL stops that are within the walk to stop distance designated for the student's school. Click Manually Assign Stop and click on the stop displayed on the map that you want this student to use for this address.

If the stop is not assigned to the student's school, a window will display asking you if you want to set the stop to service the school. Click Yes and the stop will be assigned to the student.

After you have assigned the student, the stop description will be displayed in the lower table next to the appropriate address.

If the student's house is not located, click Manually Locate House to locate the house on the map and then manually assign the student to a stop as described above.

NOTE: A student's address does not have to be located on the map in order to manually assign a stop to it.

SHOW CLOSEST STOPS FOR SCHOOL


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button displays all stops servicing the student's school that are within a specified walk distance.

If the student has more than one address assigned, select one address from the list at the bottom of the screen. Click this button to display all the closest stops for that student's school on the map. The closest stops are determined by the walk to stop distance set in the School - General Tab.

SHOW ALL CLOSEST STOPS


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button displays ALL stops that are within a specified walk distance to the student's house.

Select a student from the list and select an address from the lower table. Click this button to display all the closest stops for that student's address regardless of what schools the stops are assigned to service. The closest stops are determined by the walk to stop distance set in the School - General Tab.

AUTO ASSIGN STUDENTS TO STOPS


Assign Students to Stops Toolbar

How Do I Set a Stop as a Transfer Point or Make a Private Stop?

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button will try to automatically assign students to bus stops based on the walk to stop distance you set for each school in the School - General Tab.

Click Un-Assigned Students to list the students not assigned to stops. Click Auto Assign Stops to start the function. This function will try to assign stops to students based on the student's address, school, and walk to stop distance. This can take a very long time depending on the size of your database and the speed of your computer. This function will ignore stops that have been set as Private in the Stop Information Screen.

Auto Assign Students to Stops Message

If you want to continue, click Yes. If you want to cancel, click No.

NOTE: Before you run this function, all student addresses must be located on the map. Any students that do not have their addresses located will not get assigned to stops. You can manually assign stops to these students.

AUTO ASSIGN RIDER ELIGIBILITY


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this function will automatically assign students to a rider eligibility status based on the walk to school distance set for each school. You can set the walk to school distance in the School - General Tab.

NOTE: Before you run this function, all student addresses must be located on the map. Any students that do not have their addresses located will not get assigned. You can manually make a student a walker on the Transportation Tab of the Student Information Screen.

NOTE: This function may take a long time to execute. The amount of time this function takes to run is dependent upon the size of your database and the speed of your computer.

Auto Assign Rider Eligibility Message

If you want to continue, click Yes. If you want to cancel, click No.

AUTO CREATE STOPS


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this function will automatically create stops for students that do not have stops located within the Walk to BUS STOP range from the student's address. The stops will be created at the nearest intersection for most students. Exceptions to this are students with Wheelchair requirements, addresses located on a hazardous road, and addresses located within a Threat Zone.

PRINT UN-ASSIGNED STUDENTS


Assign Students to Stops Toolbar

Found on the ASSIGN STUDENTS TO STOPS toolbar, this button will print a report of unassigned students.

Click Print Unassigned Students and the following window pops up. Select the school(s) you want to print. Click OK to print the report.

Print Unassigned Students Screen

Students Without Stops Report

HELP


Assign Students to Stops Toolbar

Click this button to search for help on using BusBoss™.


Menu


How do I add an address?

Maintain->address. Add address.

How do I manually locate an address/all addresses?

Maintain-> address. Select either 'locate manually' to manually pinpoint one address or 'exact locate all' to have BusBoss automatically locate all unlocted addresses.

How do I add/move/delete an address?

All three of these things can be done in the Addresses dropdown menu along the top map toolbar. Select any of these options, then select the address you would like to move or delete, or select the point on the map where you would like to add an address.

How do I display addresses on the map?

Along the top map toolbar, there are three choices in the address dropdown menu for showing addresses. Selecting "Display Addresses" will allow you to choose which addresses specifically you would like to view on the map (by grade, school, race, etc. ). You can also select "Display all Addresses" or "Display Near Addresses", which will display either all addresses on the entire map, or just the section of the map that you have visible at the time, respectively.

How do I add an aide?

Maintain->aide->add. Enter all necessary information

How do I attach an aide to a route/bus/student?

In 'edit student->individual' tab, select the box stating "requires aide". In 'Maintain->route', select your route, then in the 'details' tab, click the aide icon to select the aide that will be attached to that route/bus.

How do I add a bus?

Maintain->bus->add. Enter all necessary information

How do I add a contractor?

Maintain->contractor->add. Enter all necessary information

If buses are s.d. owned, do I need to add a contractor for this?

Yes. You must add a contractor under the school district's name. Then when maintaining your buses, you must also select your school district as the contractor in the Maintain->bus->edit->contractor tab. Below the contractor name, ownership must be listed as "district owned" from the dropdown menu.

Can I move/delete/add a depot?

Yes. Using the depots dropdown menu, select which tool you would like to use. To move or delete a depot, just click on the depot you would like to move/delete, and to create one, select the point on the map where you would like a depot created.

How do I display depots on the map?

Along the top map toolbar, select the depot icon, then select "Display Depots" from the dropdown menu. This bring up a list of all depots. Select the depot you would like to see. Additionally, using the Symbols menu at the bottom of the map, you can view all depots at once.

How can I add to the Driver Employment Type list found in the Maintain Driver, Employment Tab?

From the file menu click on maintain, select Lookup Table, select Driver Type, and selct add

How do I add a driver?

Maintain->driver->add. Enter all necessary information

What happens when selecting the Tools, Driver, Delete unused menu option?

All drivers not assigned to routes are displayed in a list to manually select the drivers to delete.

I have too many things on my map, how do I clear them out?

You can use the eraser icon on the left map toolbar to remove certain icons from your map. (from view, not permanently). Click the eraser icon, and a screen will come up, bringing up a list of different things that are currently viewable on your map. you select which items you would like to remove and click "ok" and it will remove those items(routes, stops, schools) from your map.

Can I export my map?

You can export your map, using the "export to bitmap" icon on the left map toolbar. This will take your entire map and export it to a bitmap file, which you can then crop, enlarge, alter, and/or print however you would like.

Can I use stops/schools/depots that aren't located in my optimization?

No, Fleet Optimizer will only allow located stops, depots, and schools to be used during optimization. This will allow for BusBoss to provide the most efficient route based on the information given.

How do I make an optimized route permanent/active?

after optimizing your route, select it, and click 'activate' along the top menu bar.

How do I use fleet optimizer?

Maintain->fleet optimization->add. You then enter your purpose, max travel/ride time. Select your students and busses (must provide enough buses to meet the minimum req's of # of students/wheelchairs). Under 'routes' tab, select "optimize routes' this may take a moment. from there you can activate a route, view stops on the new route, or save for later editing/viewing.

How do I mark a road as hazardous/blocked?

In the top map toolbar, on the streets dropdown, there are selections to "toggle" roadblocks and hazard roads. Select the appropriate item, and click on the street that you would like to mark. BusBoss will then change the color of that section of the street to reflect your selection, and also keep this whenever you work in your database. If you choose to make a road blocked and there are already stops/routes on that section of road, a screen will come up reminding you of this, and giving you the option to optimize the selected routes immediately.

How do I set speed limits for a road?

If you would just like to set the limit for a single street, you can choose the information icon and select the street. In the following screen you can set the speed limit for that street, as well as the times that the speed limit applies to. If you want to set limits for all streets depending on type, select Tools->map->set speed limits. From there you can choose a baseline speedlimit for all roads, separated by street type (rd, st, cir, pkwy, etc.)

How do I set/change address ranges for a street?

Select the "information" icon on the left map toolbar. Click the section of street that you are interested in changing. The last tab on the following screen, "Address Ranges", will allow you to change the house numbers on that section.

What does the 'I' icon do?

The "I" icon on the left map toolbar is the "information" icon. If you click this button and then select any stop, street, intersection, depot, school, etc., you can then see (or get to) all the information about that selected area/item. It is a quick way to gain basic information on just about anything within the map part of BusBoss.

What if a road has multiple names?

On the left map toolbar, click the information icon, and select the road that you would like to add names for. In the information screen, you can add multiple names for the streets, then save.

What if they change during the day?

If a certain street changes speed limits during parts of the day, clicking the Information icon on the left map toolbar and selecting the street will bring up the screen where this can be changed. Go to the "Speed limit" tab, and you can set up a 24 hour timeline as to when and for how long the speed limit changes. Note: the beginning and end times for this screen must be 12:00am and 11:59pm, respectively. All times in between must match exactly (i.e. 12:00pm-2:00pm, 2:00pm-11:59pm)

How do I create a landmark?

From the landmarks dropdown menu, select "Add Landmark". Click on the point in the map where you would like the landmark to be. Then a screen will pop up, allowing you to choose from hundreds of icons which you can use for your landmark.

How do I display landmarks on my map?

Along the top map toolbar, select the landmarks icon, then select "Display All Landmarks" from the dropdown menu. This will show all the landmarks on your entire map.

How do I move/delete a landmark?

In either case, select the tool you would like to use from the landmarks dropdown menu, and then select the landmark you want to edit. This will either delete the landmark or select it so you can then move it to another point on the map.

What are layers on the map?

The layers on the map are the different pieces of information that make up the map as a whole. Streets, stops, streams, railroads, each of these is a layer. Certain layers (like streets and stops), can not be removed as a layer.

What do they layers do?

The layers icon is useful because if you are working on several routes with many stops on each route, you can select the layers icon, and bring the streets up to the top (for instance), and they can then be seen above all the other information that is still on your map. Another thing is that when you close your session in BusBoss, it will save the layout of your layers, so the next time you open BusBoss, the layers will appear exactly as they were when you closed it.

How can I add something to any of my dropdown menus?

Maintain->lookup table. Select the topic/area you would like to add a selection to, and click the 'add' button. Add your selection and click 'ok'

How do I print out my map?

Zoom in or out to the area of your map that you would like to print, and on the left map toolbar, select the printer icon. This will print only the viewable area of the map that you see on your screen, not the entire map.

Do I have to create a new scenario when graduating students?

You do not have to, however you should create a new scenario for your new school year to graduate into. Otherwise, when you graduate your students, all of last year's information will get overwritten and be lost.

How can I Modify the information field names used in the Student Information Tab?

From the file menu click on File, configuration, student tab, and edit the student information fields.

How do alerts work and how can I customize them?

Alerts are a set of reminders for the user regarding things within their database that may need to be fixed with some urgency. This can be customized by bringing up the alerts (Help->alerts), and clicking the "config" button at the top. From there a user can select the alerts he would like to see, as well as make different categories of users, with specific alerts designed for each category.

How do I add a street?

If there is a road that does not exist on your map, you are able to add it using the "add street" tool in the streets dropdown menu (along the top map toolbar). Just click this button and then draw in your street, noting the length of the street will show up in the top right hand corner of your map. After you finish drawing the street, the information screen will show up for your new street for you to fill in.

How do I set turn restrictions to streets?

On the map toolbar along the left, click the information button, then click on the intersection that you are interested in altering. The screen that comes up will allow you to add, edit, and delete turn restrictions for that intersection. If you click "Next" you can then set the restrictions for only certain types of vehicles or for only certain times during the day.

Where do students that ride the bus occasionally fit in?

Students that ride a bus occasionally should be put on a route and stop. If they are picked up every once in a while, then any reporting of mileage will be accurate for the state. Also, if a driver does not know when a student will ride, a note can be put on the stop to let the bus driver know this.

How can I pan through the map?

On the left map toolbar, under the "information" icon, is a blue cross with arrows, the "pan" icon. Click this icon and you can then move the map around instead of recentering to move it.

Can I change my right click function?

On the left map toolbar, there is a yellow cursor button. If you click this, it will toggle what happens

Can I delete a route?

Maintain->routes->delete. Select the route you would like to delete. If there are students/stops, or transfers assigned to this route, a warning will appear telling you so. Deleting the route will unassign any students and/or stops that were on the route, leaving the students unrouted. At this point you can choose to proceed or not in deleting the route.

How can I assign/unassign schools to a route?

Open/create the route you would like to work with. when creating a route initially busboss will ask for a school for the route to service. You may add more if necessary, or remove some as well. To do either of these, you will go to the details tab on the route. click on the school icon, and check/uncheck the schools you would like to add/remove for this route. if you try to remove a school that has students on that route attending it, or is currently being used as a transfer point, a notice will pop up reminding you of this. from there you have the choice to continue or not.

How can I calculate the mileage/time for one segment of a road/route?

Using the Point to Point function in the routes dropdown menu, you can calculate the time and mileage it would take from one point to another, or to run a series of points. Just select this tool from the dropdown menu, and click the points on the map you would like to calculate to and from. There can be as few as two points for this tool to work.

How can I change the path a route takes?

You will first select 'path->select path' and click on the area of the path that you would like change/reroute. You then select 'path->add path point' and click on the section of the path you previously hilighted, and drag it in the direction that you would like it to take. BusBoss should then begin showing you available alternative routes and you release the mouse when you have found the one you want.

How can I duplicate my route for am/pm runs?

Open/create the route you would like to make a copy of. At the top of the route screen select 'route->copy route'. Rename the 'copy' version of the route on the right, as well as making any changes to the start times, bus #'s, purpose, etc. you can also select at the bottom of this screen whether or not you would like the stops to remain in the same order or be in reverse (for am/pm runs). This can be used to experiment with a currently used route for efficiency, or to quickly generate an am/pm run for a currently used route.

How can I view info. On students assigned to a route?

Students can be viewed for either an individual stop or for an entire route. At the top of the route screen, click on the student icon, and any of the three selections can be made, to list students by stop, show students by stop, or show students by route. From this point, clicking the information icon to the left of the map, then clicking on a student's house will bring up their personal information, or by choosing them from the list will do the same thing.

How do I account for stops that I know will take longer to load/unload?

In BusBoss the user can set a standard load time for each stop. If, however, additional time needs to be added or subtracted from a stop, this can be done on the route. Click on the stop that you need to adjust, and at the bottom of the stop list is "Time Adjustment (minutes)". enter the number of minutes you would like to adjust the stop by.

How do I add a route?

Maintain->route->add. Enter all necessary information. When the purpose, start time, bus, driver, and school have been chosen, you may then select stops, additional schools, aides, and service days to the route.

How do I find all the routes that use a certain street?

Using the "Routes for Street" tool in the routes dropdown menu, you can see all the routes that travel along any selected section of street on your map. Just select this tool, and click on the street you are interested in viewing. This will hilight the section of that street, and bring up a screen listing all the routes that use that portion. This list can then be printed for reporting or reference purposes.

How do I make a route from stops?

Either open or add the route you would like to add the stops to. Click the stop sign at the top of the route page and select 'add stops to route'. Begin clicking on stops that you would like to add to your route. You can then move the stops in whatever order you would like using the same stop sign drop down, or by clicking and dragging a stop to the position you would like it to be in.

How do I optimize a route I've already made?

Open or create the route you would like to work with. at the top of the route screen, click on "routes->optimize stop order" busboss will then automatically optimize the stops you have listed for this route, putting them in the most efficient order. Remember, any stops that you have locked will not change at all, so to optimize completely a route, all stops must be unlocked.

How do I set the optimal time for a bus to start on a route?

Open the route you would like to edit. On the "details" screen, there is a section "start time". Clicking the bell icon to the right of the time will automatically set it so the bus arrives at the school you have associated with the route at the preferred bell time.

I want to see all my routes on the map, how?

On the routes dropdown menu along the top map toolbar, select "Display Routes". The screen that comes up will allow you to select the school(s) and specific (or all) route you would like to see on the map. Click "Select all Routes" to view all routes on the map.

The Tools, Route, Export to Tenex menu option can only be used if the district is using the Tenex Student Accounting System.

False, the student routing information is exported to a file, so it can be manually imported into any student accounting system

What happens when selecting the Tools, Route, Export to Tenex menu option?

All student routing information is exported to a file

What is the different between add/insert a stop?

Adding a stop will add it to the end of a route, and inserting a stop will insert the stop within the route at the stop you have hilighted.

When I optimize my route, my edited path disappears, why?

You need to lock your stop. This will take any changes you have made to the stop and lock them so they can not be changed during any automatic configuration/optimization. To do this, select the stop you would like to lock, click on the stop sign at the top of the route screen, and select 'lock/unlock stop'. This will lock (or unlock) your stop. During optimization, any changes you made to the path will remain. You can also use Path Points to avoid this.

Can I delete a school?

A school cannot be deleted if historical information exists for it. However if a school is no longer in use, it is better to make the school inactive, to keep historical information accurate within your database.

How can I change the walk to school/stop distance for a school?

Maintain->school->general. In this tab you can edit the distance a student can walk to a bus stop, as well as the distance a student can walk to that school.

How do I add a school?

Maintain->school->add. Enter all necessary information

How do I set a school as a transfer point?

Maintain->school->edit. Choose the school you would like to edit. On the General tab, select the box that says 'use school as transfer'. You can get to this screen as well by clicking the 'I' (information) icon on the left of the map, then clicking on the school within the map.

How do I set up the school's calendar?

Maintain->school->edit. Choose the school you would like to edit. Along the top of the edit school screen, click the icon that says "cal". From here you can maintain the calendar for the school. You can also set a day type for multiple schools at once using the tools->set calendar day type function. From there you can select the type of day (no school, half day, etc.) as well as the schools affected, and it will change all of them at once.

Can I copy a school calendar?

Yes. From the menu bar click maintain, select school, click edit, click the cal button. To copy the school calendar to another school click copy calendar to, select the school(s) that will receive a copy of the calendar data and click ok.

Can I move a school?

Yes. Select "Move School" from the schools dropdown menu, then click on the school you would like to move. Click again on the point where you would like to move the school to, and the process is complete.

How do I display schools on the map?

In the Schools dropdown menu, choose "Display Schools". You can then sort through a list of criteria to choose which schools you would like to display. When selecting "Display All Schools", it will display all schools over the entire map.

How do I set up a sex offender?

Maintain->sex offender->add. Enter all necessary information

What do the different threat levels mean?

Customarily the different threat levels correspond with the radius from the threat that is shaded. A more serious threat will have a larger radius shaded, however the different threat levels can be understood to mean different things (type of threat, etc. ) for different school districts.

How do I display sex offenders on the map?

Along the top map toolbar, select the sex offenders icon, then select "Display All Sex Offenders" from the dropdown menu. This will show all the offenders on your entire map.

How do I see if there are any stops within threat zones?

On the sex offenders dropdown menu, select "Display Sex Offender Problems". This will bring up all of the offender zones in which there are stops.

Can I delete a stop?

yes, this can be done two ways. The first way is to use the stop sign icon along the top of the map, and select 'delete stop', then click on the stop you would like to delete. The second way is to select the stop in the maintain->stops screen, then click the delete stop icon at the top of that screen. In either case, the stop will not be deleted if it is currently used for routing, if there are students assigned to it, if it is used as a transfer point, or if it is used in any historical data.

How do I add a stop?

On the map toolbar, click the stop sign, then add stop. Select point on map where stop is located. Enter further necessary information.

How do I change the school(s) a stop services?

Select the stop you would like to add a school to. Edit the stop by clicking on the stop sign icon with the "e" over it. Click "select schools", and check the school you would like to add to this stop.

How do I combine multiple stops into one?

Use Tools ->Stops -> Combine Current Stops. On the next screen, select the stops to combine, and the stop location that the combined stops will be at.

How do I create house stops for my students?

Tools->stops->create house stops. Select the school you would like to do this for, and the tool will run, creating a house stop for every located student address assigned to the selected school.

How do I find stops close to a student for routing?

Locate the student's address on the map. Then in the 'stop' tab in the 'assign days' screen of 'edit student', you can select one of two icons. The first, 'show closest stop for school', will show you all stops within the walk to stop distance that service the same school as the student attends. the second icon 'show all closest stops', shows all stops within the walk to stop distance that service any school.

How do I locate an unlocated stop?

In Maintain-> stops, select the stop sign with a 'u' over it, that will list all your unlocated stops. Select the stop you would like to locate. From here you can choose to either manually locate the stop using the stop sign with the pushpin icon, or auto locate the stop by selecting the stop sign icon. THis can also be done from the Maintain->students screen, assign days tab, under 'stops'. Select the icon to manually locate the stop and you can click on the map where the stop should be.

How do I move a stop?

Along the map toolbar, click on the stop sign, then 'move stop'. Select the stop you would like to move, then click in the new location you would like the stop to be.

How do I see what route a stop is on?

Select the stop you would like to view routes on, then select the edit stop icon. Click the 'routes' icon, and this will show you what routes, days, and times this stop is serviced.

How do I set a stop as a transfer point?

In the stop screen, select the stop you would like to set, and edit the stop using the stop sign icon with the "E" over it. You can then check the box that says "Stop can be used as transfer". You can also get to this screen by clicking the "I" (information) icon on the left side of the map, then clicking on the stop you would like to edit.

How do I set a stop as private?

Same directions as setting a stop as a transfer point.

How do I split a stop into two separate ones?

Tools->Stops->split current stops. On the next screen you select the stop you would like to split, then you name the new stop, and choose which students you would like to move over to the new stop. This will then place a second stop at the same location as the first, but split the students that are picked up/dropped off at each stop.

What does "reset school stops" do?

This tool will look at the routes and stops, and see what school the bus ends up at, then resets all stops on that route to service the school the bus ends up at.

How can I display all stops on the map?

Select the "display all stops" tool from the stops dropdown menu along the top map toolbar. This will display all known stops on your entire map.

How do I add/delete/move a stop?

Any of these functions can be completed by using the stops dropdown menu along the top map toolbar. Select what you would like to do to the stop, then select the stop.

How do I only display certain stops on the map?

By selecting the "Display Stops" tool from the stops dropdown menu, you can select from a list of criteria which stops you would like to be visible on your map. You can choose from purpose, grade, race, school, etc.

Can I add/delete a street?

A street can be added and/or deleted from the top menu toolbar, Street dropdown menu. In this menu, you can add a street by clicking at the beginning of the street and dragging the length of the street, or delete a street by selecting the street you would like to get rid of.

Can I set a street as "one way"?

On the top map toolbar, in the street dropdown menu, select "set one way street". Then you can select the street that you would like to make one way. This will only work for a section of the road, not the entire length. You must select each section that you want to change (for situations where only part of a street is one way)

How can I see all my dead ends?

Along the top map toolbar, in the streets dropdown menu, select "display dead ends". This will show all your dead end roads on the map.

How do I find a street/address on the map?

Select the street icon on the top map toolbar, and choose "Find Street" or "Find Street Address" from the dropdown menu. On the next screen you can enter the name of a street to find the entire road, or enter a street address to find a specific point along a street.

How do I find an intersection on the map?

Select the street icon on the top map toobar, and choose "Find Intersection". On the next screen you can enter your intersection information and it will locate any possible matches on the map.

What does it mean to split a street?

An entire length of a road is divided up into smaller sections, called breaking points. Usually these section points coincide with intersections, but a long straight section of road may have several "nodes"(breaking points) along it. When placing a stop on a street, BusBoss will look for the closest node to associate the stop with, usually being the same spot the stop is in. Occasionally, however, the route will pass the stop, or not get to it, because the naturally occurring closest node does not align with the stop. At this point it is necessary to split the street to manually create a node closest to your stop or school. By selecting "split street" from the street dropdown menu along the top map toolbar, and selecting the point on the street you would like to break, this will create the node you need along your road.

Can I delete a student?

Yes. However it is best to make a student inactive so that they will still be counted toward the yearly state reports.

How do I add a student to a stop/route?

Select the stop sign icon from the top of the map, and click "assign students to stop". From this screen you can then view unassigned students, select to manually assign a student to a stop, show closest stops, or have BusBoss automatically assign all students to stops.

How do I add a student?

Maintain->student->add. Enter all necessary information

How do I set up a child who has split custody arrangements?

Maintain->student->edit. Choose the student you would like to edit. On the left side of the screen, select "split custody" from the list. Check the box that says 'assign/unassign split custody'. From there you can assign an address, stop, school, and route for the child. you must add the second address in the 'address' screen to the left, so you can then assign it as the split custody address.

How do I set up a student to transfer for a half day program?(Second School)

In order to set up a child for a transfer, several things must happen. If the child is going to another school during the day, in the "second School" screen in maintain student, you need to check the box "student attends half day program". From there you must enter the second school, the route to the school, and route from the school (if the child goes back to their first school prior to going home). If the student goes straight home from the second school, just set up the pm route in the "assign days" tab to take them from the second school home, and do not enter anything in the "route from school" box in the "second school screen".

Where do I go to make a student inactive?

Maintain->student->edit. Choose the student you would like to edit. On the left side of the screen, select 'Individual' from the list, and at the bottom, select 'inactive'. This will then make the studen inactive in busboss.

How do I view all students on the map?

On the top map toolbar, select the student icon then select "display all students". From this point you can choose to show the students at their home location, pickup stop, or dropoff stop location.

Can I move/delete/add a transfer?

Yes. Using the transfers dropdown menu, select which tool you would like to use. To move or delete a transfer, just click on the transfer you would like to move/delete, and to create one, select the point on the map where you would like a transfer created.

How do I display transfers on the map?

Along the top map toolbar, select the depot icon, then select "Display Transfers" from the dropdown menu. This bring up a list of all transfers. Select the transfer you would like to see. Additionally, using the Symbols menu at the bottom of the map, you can view all transfers at once.

How can I change my password?

From the file menu click on file, change password

How do I add a user?

Maintain->User. Add user button.

How do I delete a user?

Maintain->user. Delete user button.

How I set permission levels for my users?

Maintain->user. Select the "security" icon. From there you can select what level of access you want certain groups/users to have throughout busboss.

What are the user permission settings available from within BusBoss?

No Access, Read Only and Full Access

How can I get a list of students living within a pre-defined area of the map?

From the file menu click on Reports, Zones, and Students within Zone

How do I display the entire zone on the map?

From the file menu click on Maintain, Zone, and then click on zoom to full from the left map menu

How do I set up a zone?

Maintain->zone->add. Enter all necessary information

How do I zoom in/out on the map

On the left map toolbar, you can use the magnifying glasses with the "+" or "-" signs on them to zoom in and out of the map. If you would like to zoom in on a particular area of the map, you can draw a box around that area by clicking on the map and dragging around the area, and it will zoom in. You can also click on a point in the map and use your mouse's scroll wheel to zoom in and out of the map. You can also use the "+" or "-" keys.

I'm confused about where I am on the map, can I zoom out all the way?

Yes. On the left map toolbar, there is an icon with a map with a box around it. Clicking this zoom your map out to full view. From this point you can see the entire map in one screen. This is useful to see how large a zone would be, or where a large concentration of your stops/routes may fall in comparison to other landmarks.